EL Wire Tips & Info

How To Make A Stickman - Method #2

10/15/2015 by Andrew Lytwyn

 

 STICKMAN - METHOD #2

 

This stickman is so EASY to make.  This stickman uses just one el wire inverter for both the body and head.

 

1. Measure the length of el wire that you will need for your legs.

2. Measure the length of el wire you will need going up your torso and across your chest and down your arms.

3. Measure the length of el wire you will need to go around your head.

4. With this style of stickman  - METHOD #2 you will need a 5-Output Splitter, an el wire inverter and one 3-Foot extension.

5. Connect the 5-Output Splitter to the inverter and then connect Output #1 forn the splitter to the LEFT leg, connect Output #2 to the RIGHT leg, connect Output #3 to the RIGHT torso, connect Output #4 to the LEFT torso and then connect Output #5 to the 3-Foot extension which will light the head area.

6. IT DOES NOT MATTER WHICH OUTPUT GOES TO WHERE AS LONG AS YOU CONNECT ALL (5) FIVE CONNECTORS TO THE (5) SECTIONS OF EL WIRE.

 

Close-Up of Connectors and Inverter