Piece to Piece Splitter System

The “Piece to Piece” Splitter System is a more STREAMLINED Splitter System Allowing you to connect and power multiple El Pieces (either El Wire, Flat El Panels or a combination of both) using less wire and giving you a cleaner look.

PLEASE NOTE – IMPORTANT: This piece to piece splitter system is OPPOSITE of our standard splitter system. With this Piece to Piece Splitter System, which you are looking at right now, you can select either a 2 or 3 or 4 or 5 or 6 output splitter. For Example if you order a 4-Output Piece to Piece Splitter it will have One (1) FEMALE Connector with 4 Male connectors as your output. The one Female connector plugs into a Flat El Panel Power Shape or El Wire Section and now you have four (4) Male connectors. In this Example let’s say your design is a shirt and you shirt has five (5) pieces let’s say (3) El Flat Panels and (2)el wire sections.

Your 4-output piece to piece splitter will plug into your first Flat El Panel. Now you will measure the distance to the next piece and you will purchase an extension shown below. We sell 3-Inch to 30-Inch extensions you select. The extension length will be the distance between the first piece to the next and then you will measure the distance to the next piece and purchase that length extension and so on.

VERY IMPORTANT: The Piece to Piece splitter system will NOT Plug into ANY of our INVERTERS you will need to start off from your inverter with one of our standard splitters or 3-foot extension. the output of our standard splitters or 3-foot extension will is required ONLY to start off of the inverter and the Piece to Piece Splitter system can handle everything else.

WATCHING THE VIDEO WILL GIVE YOU AN EASY VISUAL OF HOW THE PIECE TO PIECE WORKS.